- 10 -
-
PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133/100/66/33 bus master dual-channel IDE ports support up
to two IDE devices (one Master and one Slave per channel).
The IDE bus implentents data transfer speeds to 133/100/66/33 Mb / Sec and
also supports PIO mode 0, 1, 2, 3, 4.
80-pin cable backward compatible legacy ATAPI devices, ATAPI IDE CD-
ROM, CD-R, CD-RW and LS-120 supports.
-
ATX Power Supply Connector
ATX power supply unit can be connected to the onboard 20-pin ATX power
connector, and 4-pin ATX power connector. The unit supports Suspend and
Soft-On/Off modes by the dual-function power button.
-
Advanced Configuration and Power Interface
Features four power-saving modes: S1 (Snoop), S3 (Suspend to RAM), S4
(Suspend to DISK), and S5 (Soft-Off). ACPI provides more efficient energy-
saving features controlled by your operating system that supports OS Direct
Power Management (OSPM) functionality.
-
System BIOS
Provides licensed Award BIOS V6.0 PG on the 4Mb Flash ROM, and sup-
ports Green PC, Desktop Management Interface (DMI).
-
Form Factor
System board conforms to the Full ATX specification.
Board dimension: 305 x 244 (mm).
-
Advanced Features
Ø
Low EMI - Built in spread spectrum. Unused PCI/SDRAM slots are shut off
by the automatic clock for reducing EMI.
Ø
Dual Function Power Button - The system can be in any of the two
states: one is Suspend mode and the other is Soft-Off mode. Pushing the
power button for less than 4 seconds places the system into Suspend
mode. When the power button is pressed for longer than 4 seconds, the
system will enter Soft-Off mode.
Ø
Modem Ring Power-On - The system can be powered on automatically
by the activation of modem ringing.
Ø
CPU Multiplier Setting - This item allows users to adjust CPU Multiplier
in BIOS.
