- 33 -
Keylock Connector (KEYLOCK - J27)
Attach the 3-pin Power-LED connector
cable from the housing front panel to the
PWR header on the mainboard. The
power LED stays lit while the system is
running.
Enhanced IDE Ports and Floppy Connectors
The AB61 mainboard features two 40-pin dual-channel IDE device connec-
tors (IDE1/IDE2) providing support for up to four IDE devices, such as CD-
ROM and Hard Disk Drives (H.D.D.). This mainboard also includes one
34-pin floppy disk controller (FDC) to accommodate the Floppy Disk Drive
(F.D.D.). Moreover, this mainboard comes with one 40pin ribbon cable to
connect to IDE H.D.D. and one 34-pin ribbon cable for F.D.D. connection.
Important:
Ribbon cables are directional, therefore, make sure to always
connect with the red cable stripe on the same side as pin #1 of
the IDE1/IDE2 or FDC connector on the mainboard.
19
20
Note :
Please connect your
system H.D.D. on IDE 1.
