- 31 -
ATX Power On/Off Switch Connector (PWON - S1)
The Power On/Off Switch is a momen-
tary type switch used for turning on or off
the system’s ATX power supply. Attach
the connector cable from the Power
Switch to the 2-pin PWON header on the
mainboard.
Green LED Connector (GLED - J48)
The Green LED (GLED) indicates that the
system is currently in one of the power
savings mode (Doze/Standby/Suspend).
When the system resumes to normal
operation, mode, the Green LED will go
off. Attach a 2-pin Green LED cable to
GLED header.
EPMI Connector (EPMI - J42)
Hardware System Management Interface
(EPMI) header may attach to a 2-pin mo-
mentary switch. Press the EPMI switch to
force the system into power savings mode;
press again to resume normal operation.
12
Note :
Please notice the Speaker and all the LED connector is directional.
If your chassis’s LED does not light during running, please simply
change to the opposite direction.
13
14
