17
Hardware Interface Description
① Power LED
Illuminates green when Power over Ethernet (PoE) is provided.
② Network Audio LED
•
Solid Green:
Sending or receiving a digital audio signal.
•
Flashing Green:
Cannot establish a connection.
③ RF Link LED
Color
Status
Green
≥1 linked microphone is powered on in the
Active or Mute state.
Solid Yellow
≥1 linked microphone is in the Standby or Off
state.
Flashing Yellow
The ID button in the GUI has been pressed.
Solid Red
Problem with RF connection ???
Flashing Red
No microphones are linked to the unit.
④ Reset Button
Press and hold the reset button for 10 seconds to hard reset the MXW
system to factory default settings.
Note:
Performing a reset will delete system configurations made in the
GUI, including device association and microphone link.
⑤ Ethernet Jack
Connects a Cat5e (or higher) cable to a PoE source and the network.
⑥ Network Status LED (Green)
Off
= no network link
On
= network link established
Flashing
= network link active
⑦ Network Speed LED (Amber)
Off
= 10/100 Mbps
On
= 1 Gbps
⑧ Cable Routing Path
Routes the Ethernet cable to enable a flush-mount to the surface.
③
④
⑤
⑥
⑦
⑧
① ②
Access Point Transceiver (APT)
10/02/12
Summary of Contents for Microflex MXW1
