background image

WICHTIGE SICHERHEITSHINWEISE

1.  Diese Hinweise LESEN. 

2.  Diese Hinweise AUFBEWAHREN. 

3.  Alle Warnungen BEACHTEN.

4.  Alle Hinweise BEFOLGEN. 

5.  Dieses Gerät NICHT in Wassernähe VERWENDEN. 

6.  NUR mit einem sauberen Tuch REINIGEN. 

7.  KEINE Lüftungsöffnungen verdecken. Hinreichende Abstände für ausreichende Belüftung 

vorsehen und gemäß den Anweisungen des Herstellers installieren. 

8.  NICHT in der Nähe von Wärmequellen wie zum Beispiel offenen Flammen, Heizkörpern, 

Wärmespeichern, Öfen oder anderen Hitze erzeugenden Geräten (einschließlich 

Verstärkern) installieren. Keine Quellen von offenen Flammen auf dem Produkt platzieren. 

9.  Die Schutzfunktion des Schukosteckers NICHT umgehen. Ein Schukostecker verfügt 

über zwei Steckerzinken sowie Schutzleiter. Bei dieser Steckerausführung dienen die 

Schutzleiter Ihrer Sicherheit. Wenn der mitgelieferte Stecker nicht in die Steckdose passt, 

einen Elektriker mit dem Austauschen der veralteten Steckdose beauftragen. 

10.  VERHINDERN, dass das Netzkabel gequetscht oder darauf getreten wird, insbesondere 

im Bereich der Stecker, Netzsteckdosen und an der Austrittsstelle vom Gerät. 

11.  NUR das vom Hersteller angegebene Zubehör und entsprechende Zusatzgeräte 

verwenden.

12.  NUR in Verbindung mit einem vom Hersteller angegebenen oder mit dem Gerät 

verkauften Transportwagen, Stand, Stativ, Träger oder Tisch verwenden. Wenn ein 

Transportwagen verwendet wird, beim Verschieben der Transportwagen/Geräte-Einheit 

vorsichtig vorgehen, um Verletzungen durch Umkippen zu verhüten.

13.  Bei Gewitter oder wenn das Gerät lange Zeit nicht benutzt wird, das Netzkabel 

HERAUSZIEHEN. 

14.  ALLE Reparatur- und Wartungsarbeiten von qualifiziertem Kundendienstpersonal 

durchführen lassen. Kundendienst ist erforderlich, wenn das Gerät auf irgendwelche 

Weise beschädigt wurde, z. B. wenn das Netzkabel oder der Netzstecker beschädigt 

wurden, wenn Flüssigkeiten in das Gerät verschüttet wurden oder Fremdkörper 

hineinfielen, wenn das Gerät Regen oder Feuchtigkeit ausgesetzt war, nicht normal 

funktioniert oder fallen gelassen wurde. 

15.  Dieses Gerät vor Tropf- und Spritzwasser SCHÜTZEN. KEINE mit Wasser gefüllten 

Gegenstände wie zum Beispiel Vasen auf das Gerät STELLEN. 

16.  Der Netzstecker oder eine Gerätesteckverbindung muss leicht zu betätigen sein. 

17.  Der Luftschall des Geräts überschreitet 70 dB (A) nicht. 

18.  Das Gerät mit Bauweise der KLASSE I muss mit einem Schukostecker mit Schutzleiter in 

eine Netzsteckdose mit Schutzleiter eingesteckt werden. 

19.  Dieses Gerät darf nicht Regen oder Feuchtigkeit ausgesetzt werden, um das Risiko von 

Bränden oder Stromschlägen zu verringern. 

20.  Nicht versuchen, dieses Produkt zu modifizieren. Ansonsten könnte es zu Verletzungen 

und/oder zum Produktausfall kommen.

21.  Dieses Produkt muss innerhalb des vorgeschriebenen Temperaturbereichs betrieben 

werden.

Dieses Symbol zeigt an, dass gefährliche Spannungswerte, die ein 

Stromschlagrisiko darstellen, innerhalb dieses Geräts auftreten.

Dieses Symbol zeigt an, dass das diesem Gerät beiliegende Handbuch 

wichtige Betriebs- und Wartungsanweisungen enthält.

CONSIGNES DE SÉCURITÉ IMPORTANTES

1.  LIRE ces consignes. 

2.  CONSERVER ces consignes. 

3.  OBSERVER tous les avertissements.

4.  SUIVRE toutes les consignes. 

5.  NE PAS utiliser cet appareil à proximité de l'eau. 

6.  NETTOYER UNIQUEMENT avec un chiffon sec. 

7.  NE PAS obstruer les ouvertures de ventilation. Laisser des distances suffisantes pour 

permettre une ventilation adéquate et effectuer l'installation en respectant les instructions 

du fabricant. 

8.  NE PAS installer à proximité d'une source de chaleur telle qu'une flamme nue, un 

radiateur, une bouche de chaleur, un poêle ou d'autres appareils (dont les amplificateurs) 

produisant de la chaleur. Ne placer aucune source à flamme nue sur le produit. 

9.  NE PAS détériorer la sécurité de la fiche polarisée ou de la fiche de terre. Une fiche 

polarisée comporte deux lames dont l'une est plus large que l'autre. Une fiche de terre 

comporte deux lames et une troisième broche de mise à la terre. La lame la plus large ou 

la troisième broche assure la sécurité de l'utilisateur. Si la fiche fournie ne s'adapte pas à 

la prise électrique, demander à un électricien de remplacer la prise hors normes. 

10.  PROTÉGER le cordon d'alimentation afin que personne ne marche dessus et que rien ne 

le pince, en particulier au niveau des fiches, des prises de courant et du point de sortie 

de l'appareil. 

11.  UTILISER UNIQUEMENT les accessoires spécifiés par le fabricant.

12.  UTILISER uniquement avec un chariot, un pied, un trépied, un support ou 

une table spécifié par le fabricant ou vendu avec l'appareil. Si un chariot 

est utilisé, déplacer l'ensemble chariot-appareil avec précaution afin de ne 

pas le renverser, ce qui pourrait entraîner des blessures.

13.  DÉBRANCHER l'appareil pendant les orages ou quand il ne sera pas utilisé pendant 

longtemps. 

14.  CONFIER toute réparation à du personnel qualifié. Des réparations sont nécessaires 

si l'appareil est endommagé d'une façon quelconque, par exemple : cordon ou prise 

d'alimentation endommagé, liquide renversé ou objet tombé à l'intérieur de l'appareil, 

exposition de l'appareil à la pluie ou à l'humidité, appareil qui ne marche pas normale-

ment ou que l'on a fait tomber. 

15.  NE PAS exposer cet appareil aux égouttures et aux éclaboussements. NE PAS poser 

des objets contenant de l'eau, comme des vases, sur l'appareil. 

16.  La prise SECTEUR ou un coupleur d’appareil électrique doit rester facilement utilisable. 

17.  Le bruit aérien de l'appareil ne dépasse pas 70 dB (A). 

18.  L'appareil de construction de CLASSE I doit être raccordé à une prise SECTEUR dotée 

d'une protection par mise à la terre. 

19.  Pour réduire les risques d'incendie ou de choc électrique, ne pas exposer cet appareil à 

la pluie ou à l'humidité. 

20.  Ne pas essayer de modifier ce produit. Cela risque de causer des blessures et/ou la 

défaillance du produit.

21.  Utiliser ce produit dans sa plage de températures de fonctionnement spécifiée.

Ce symbole indique la présence d'une tension dangereuse dans 

l'appareil constituant un risque de choc électrique.

Ce symbole indique que la documentation fournie avec l'appareil con-

tient des instructions d'utilisation et d'entretien importantes. 

10/02/12

Summary of Contents for Microflex MXW1

















































Reviews: