![background image](http://html1.mh-extra.com/html/shure/conferenceones/conferenceones_user-manual_1262335004.webp)
2 Description
2.1 Power Supply Unit C1-PS 30s
The power supply unit C1-PS 30s supplies the consoles with power and serves as an interface to external
devices.
Front view
2
3
3
7
4
1
5
6
2
Daisy chain socket
Minicon socket for connecting the
consoles via bus cables.
Audio input
The ON/OFF button activates the input on
the rear of the unit. The volume knob
adjusts the input signal level from the
external source. The signal and peak LEDs
illuminate to indicate the status of the
audio input level.
Monitor section
1/4” headphone output with volume
control. Press the volume knob to toggle
between monitoring the audio input and
output. The LEDs illuminate to indicate
which source you are currently monitoring.
Power LED
Illuminates when the unit is switched on
with the power switch.
1
4
2
5
Protect LED
During normal operation, this illuminates
when the power is activated, then goes out
when the system is ready. It also
illuminates if there is a fault in the power
supply unit, or if the number of consoles
connected to the system exceeds the
recommended number.
6
Audio output
The ON/OFF button activates the audio
output on the rear of the unit. The volume
knob adjusts the signal level output from
the conference system. The signal and
peak LEDs illuminate to indicate the status
of the audio output level.
3
Power switch
Use this button to turn the unit on or off.
7
English