Solar working station operation manual SR881
- 38 -
►Repress “SET” again, “HND2off” displays, P2 output is
switched-off
►Press “ESC” to exit P2 set program
--------------------------------------------------------------------------------------------------------------------------
►Press “+” button, “HND3 off” displays on the screen, H1 output manually set
►Press “SET” button, “HND3on” displays on the screen,
H1 output is switched-on
►Repress “SET” again, “HND3off” displays, H1 output is
switched-off
►Press “ESC” to exit H1 set program
------------------------------------------------------------------------------------------------------------------------- -
4.7 PASS Password setting
Setup steps:
To access main menu PASS,
►Press “SET” button, “PWDC 0000”, the left digital blinks, ask for to enter the password,
factory set is “0000”
►Press “+”“-” button to enter the first digital
►Repress “SET” button, the second digital blinks
►Press “+”“-” button to enter the second digital
►Repress “SET” button, the third digital blinks
►Press “+”“-” button to enter the third digital
►Repress “SET” button, the fourth digital blinks
►Press “+”“-” button to enter the fourth digital
►Press “SET” button, “PWDN 0000” displays on the
screen, ask for entering a new password, doing like above
to enter the new password
►Press “SET” button, “PWDG 0000” displays on the screen, ask for reentering the new
password, doing like above to reenter the new password, “PWOK” displays on the screen to
indicate reentering password successfully.
►Press “ESC” button to exit set program or wait for 20 seconds to exit automatically.
Warning
!
If the password is forgot, it is not possible to recover, but you can recover the password to
factory set, then you can reedit a new password like above descript steps, doing like
following to recover to factory set.