Solar working station operation manual SR881
- 30 -
►Press “SET” button, parameter “OFF” blinks on screen
►Repress “SET” button to activate or deactivate this
function, after function activated; factory set is “REC ON”
► Press “ESC” button to exit the menu or wait for 20
seconds to exit automatically, parameters are saved automatically.
REC signal displays on screen, it indicates that this function is in activated.
4.4.8 C- F Celsius and Fahrenheit temperature switch
Setup steps:
To access main menu TEMP, then select submenu C-F,
“C
＿
F
℃
” displays on screen.
►Press “SET” button, parameter “
℃
” blinks on the
screen.
►Press “+” button, to select between Celsius and
Fahrenheit temperature, factory set is
℃
►Press “ESC” button to exit menu or wait for 20 seconds to exit automatically, parameters
are saved automatically.
4.5 Main menu - FUN Auxiliary function
The auxiliary function of this controller can be set u
nder “FUN” menu; it is possible to
activate several auxiliary functions at the same time.
Note:
In “FUN “menu, some functions are deactivated, then activated or deactivated status for
following auxiliary functions in submenu is also different.
Example to explain:
If you set thermal energy measuring parameter (OHQM) is off, that means this function is
deactivated, then, FMAX, MEDT and MED% functions are disappeared in the submenu,
only when this function (OHQM) is activated, and they just appear in the submenu. (See
detailed in § 2.2 menu structure)
