7
2.Connect one end of the supplied 7.62 meter hose to the hose adapter on the regulator
and the other end of the hose to the heat tool. Tighten all fittings with the
supplied wrench
(left handed threads, so tighten counter clockwise)
.
3.Open the propane tank valve and check for any leaks by spraying a soapy
water mixture on the fittings. If any bubbles are visible, shut off the propane
tank and tighten the fittings.
4.When you first turn on the propane tank, the pressure gauge on the regulator
will slowly move toward the factory setting of 1.5 bar. Once the hose is fully
pressurized, the needle on the gauge will stop at 1.5 bar. Now the heat tool is
ready to be fired.
Pictured: Hand wheel
on top of your supplied
propane tank.
To open the flow of
propane, turn the tank
hand wheel in a counter
clockwise motion and
watch the regulator gauge
