4
• Do not look down the combustor nozzle while the tool is in operation or attached to a
fuel source.
•
The heat tool should be kept 15 cm – 20 cm away from the shrink film when in
operation. Never keep the heat on one area for more than a few seconds.
Once heat is applied to the shrink film, it will continue to shrink even after
the heat is moved away from the area.
• Never modify the tool in any way and use only Shrinkfast replacement parts.
• Never operate in a basement or closed in, non-ventilated area or on an area that you
cannot see.
• Always operate the heat tool with the flame guard installed.
• This heat tool generates a db level under 85 db, however proper ear protection is always
recommended when operating any heat tool.
Safety Certification:
This Shrinkfast model MZ heat tool kit has been safety certified following the EU
required testing methods listed under the 2006/42/EC Machinery Directive,
EN 746-1:1997+A1:2009. The Shrinkfast model MZ has been designed, assembled and
tested following directives listed in the ISO 9012-2008(E) “Gas welding equipment —
Air-aspirated hand blowpipes — Specifications and tests” document. Shrinkfast has
successfully completed these testing directives and has permission to apply the
CE mark and distribute throughout Europe.