6
4.
Jet Valve 1
Safety lock located at user mode, release
pressure for 5s, jet valve will be on and off
for 3 times
5.
Jet Valve 2 none
Language
English / Chinese
Language switch
Mode Select
Normal Mode / Factory
Mode
Factory mode is for test in factory only
Tip setting
OFF / ON
Turn ON or OFF
When turning on, if the machine slant over
45°, the flamer stops running, system will
report E6
DMX Channel Mode
2CH-P / 6CH / 2CH-N
Change the DMX Channel Mode.
Default Parameter
OFF / ON
Reset default parameter settings
▲
Operation Instructions
1. Direction explanation
Please read the safety instructions printed on the top panel of uFlamer carefully.
Safety distances for uFlamer is at least 15m in projection directions and 5m around.
AC 100V-240V 50/60Hz
MADE IN CHINA
Showven Technologies Co.,Ltd.
www.showven.cn
[email protected]
+86-731-83833068
Building B1, Changsha E Center, Liuyang Economic
Development Zone, Hunan,China.
WARNING
Hazardous voltage inside, please do not remove
the cover unless by trained personnel.
People and flammable materials should keep a
minimum safty distance of 5m from the flame r.
300W
2. DMX ChannelMode selection for host controller ZK6200/ZK6300
DMX
ChannelMode
Host controller
device selection
Host controller
ZK6200/ZK6300 device
setting
Note
2CH-P mode
--none--
Press F3 --Select device
items--Confirm
--
▲
6CH mode
FLAMER
Feedback the pressure
value
2CH-N mode
SPARKULAR
Feedback the pressure
value
▲
6CH mode is reconmmended, when you use host controller ZK6200/ZK6300 for the show
control.