1
USER MANUAL
uFlamer
★
Please read this manual carefully before operating this product.
★
Warranty card attached in the manual, please keep it well.
▲
Warning
\
Unauthorized repair are prohibited, it may cause serious incident
\
Make sure power supply in consistent with the rated voltage of the equipment, and the socket
must well grounded. Unplug and turn off the machine when not use
\
Before connect the power cable, communication DMX cable should well connected and ensure
the command keep at firing OFF status. And safety lock stay at test mode
\
The device can only be placed horizontally. Safety distances are marked on the device (at least
15m in projection direction, at least 5m around the device)
\
After turning on the device, no person allows to stay in the danger area. Ensure all persons that
are part of the show be informed about the safety distance, risks and functions of the device
\
Always have a CO2 fire extinguisher and an extinguishing blanket in case of needed
\
If there be any doubt as to the safety operation of the device in any circumstances, the device
should be taken out of service immediately. Be sure the device is in good operating condition
before use. If fail to fire correctly, immediately shut down and check it accordingly
\
Be sure to use high quality flame fluid, otherwise, it is easily lead to failure or danger. Be
careful when refill the flame fluid tank. Please keep flame fluid away from heat source, sparks,
fire or other possibility of ignition. Do not smoke!
\
The operator responsible for the control of uFlamer must always have a clear view of the device,
so that he/she can stop the show immediately when there is danger. The main AC power switch
should near operator. So that operator can turn off the power of all devices in case of abnormal
\
The device shall not be altered and applied to other use purpose
Disclaimers:
SHOWVEN technologies Co., Ltd excludes liability for unsafe situations, accidents and damages
resulting from:
1. Ignoring warnings or regulations as shown on flamer or this manual.
2. Use for other applications or circumstances other than those indicated herein.
3. Changes to the flamer, including use of non-original spare parts.
4. Removed safety cover without authorization from SHOWVEN.
5. Use this machine by unqualified or untrained personnel.
6. Improper use of machine.
▲
Foreword
Thanks for choosing uFlamer. Please read following manual carefully and completely before
operating this product. Operate according to instructions is very important for safety, and can
elongate the service life of the machine
Strictly follow the instruction in the manual when operate uFlamer. If you have any doubts,
please contact SHOWVEN technologies Co., Ltd by [email protected]
We assume the person who use or come in contact with the device are familiar with how the
device should be handled. This includes proper use, maintenance and repair of the machine as
defined in this user manual.