7.
Press "Add", will shown "Added successfully!" on top of screen;
8.
Click "Back" to super DMX interface;
9.
Select the position where you want to put the Cue in Cue list table;
10.
Select the preset firing rule "
";
11.
Select the devices in "Device List";
12.
Set the parameters at “CUE setting”, For example, the setting in above picture is effect of
“Height 10”, firing duration “2s”, trigger delay is 3s, repeat period is 15s, repeat counts 2
times, CUE group repeat counts is 1;
13.
Press “OK” to save the setting;
13
