5.
Check Slave:
Check pyro slave status.
6.
Noise Info:
Check interference of pyro wireless signal.
7.
File:
File backup, Device Lib and Software update.
8.
Settings:
Parameters setting.
Δ
Super DMX
Click “Super DMX” enter super DMX interface as below.
"Super DMX" consist of "Device List" and "Cue List".
"Device List" add stage device and show in table.
"Cue List" edit the effect of stage device.
SCENE0, SCENE1, SCENE2, SCENE3:
different scene may use different device and CUE,
according to different performance scene requirements operator can switch easily.
Check:
Check Temp. Pressure etc parameters of SHOWVEN device on FXcommander
TM
Select Even, Select Odd, Select Same, Clear Select: Select or Clear select of device, only for the
same category device.
Add Device:
Switch to device adding interface to add device.
Delete Device:
Delete selected device.
Delete All:
Delete all device in device list.
Enable:
Enable / Disable device. Default setting is enable all. The disabled device can still be
selected and set up. When running Cue, the disabled device will shown in different colors, but
in disable status.
Duration:
Firing duration for single trigger of each device.
Trigger Delay:
Interval between firing of two adjacent devices.
Repeat Period:
Interval between two triggers of the same device. It works only when Repeat
Counts > 1.
Repeat Counts:
Repeat times.
