3
Ordercode: 43157
X-Terminator
Safety Instructions
Every person involved with the installation, operation and maintenance of this device have to:
• be
qualified
•
follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
•
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
•
Never remove warning or informative labels from the unit.
•
Never use anything to cover the ground contact.
•
Never place any material over the lens.
•
Never look directly into the light source.
•
Never leave any cables lying around.
•
Never aim the laser beam at people or animals!
•
Never use the device during thunderstorms, unplug the device immediately.
•
Never point a laser at aircraft, this is a federal offense.
•
Never point unterminated laser beams into the sky.
•
Never open the laser housing. The high laser power levels inside of the protective housing can start
fires, burn skin and will cause instant eye injury.
•
Do not insert objects into air vents.
•
Do not connect this device to a dimmerpack.
•
Do not open the device and do not modify the device.
•
Do not point lasers at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser
reflections can be hazardous.
•
Do not expose the output optic (aperture) to cleaning chemicals
•
Do not use laser if the laser appears to be emitting only one or two beams
•
Do not use laser if housing is damaged or open, or if optics appear damaged in any way.
•
Do not operate laser without first reading and understanding all safety and technical data in this
manual. Never look into the laser aperture or laser beams
•
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
•
Do not shake the device. Avoid brute force when installing or operating the device.
•
After set up and prior to public use, test laser to ensure proper function. Do not use the laser if any
defect is detected. Do not use, if the laser emits only one or two laser beams rather than
dozens/hundreds, as this could indicate damage to the diffraction grating optic, and could allow
emission of higher laser levels.
•
Only use device indoor, avoid contact with water or other liquids.
•
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
•
Only operate the device after having familiarized with its functions.
•
Avoid flames and do not put close to flammable liquids or gases.
•
Always check the regulations when using a class 3B laser product.
