19
Ordercode: 43157
X-Terminator
5. System Settings
01)
Press the
MODE
button until the display shows
.
02)
Press the
ENTER
button to enter the menu.
03)
There are 3 options available. Press the UP and DOWN buttons to toggle between them:
Power saving mode
System Reset
Test Mode
If the display shows
, press the
ENTER
button to enter the menu.
04)
Press UP and DOWN buttons to choose between
.
05)
If the device is set to ON, it is operating in the power saving mode. If the device is set to OFF, the
power saving mode is inactive.
If the display shows
, press the
ENTER
button to enter the menu.
06)
will appear shortly on the display.
07)
When it disappears, the device will return to the previously active mode and the settings will be reset
to the factory values.
If the display shows
, press the
ENTER
button to enter the menu.
08)
It is now possible to test if all the features available on the device work properly.
09)
It is possible to use the included remote control (page 11, Remote Control).
DMX Channels
2 channels
Channel 1 – Built-in programs
0-9 Off
10-26 AUT0
27-43 AUT1
44-60 AUT2
61-77 AUT3
78-94 AUT4
95-111 AUT5
112-127 AUT6
128-145 SOU0
146-163 SOU1
164-181 SOU2
182-199 SOU3
200-217 SOU4
218-235 SOU5
236-255 SOU6
Channel 2 – Speed (Ch 1 must be set between 10-127
)
0-255
Speed control, from slow to fast
