background image

 

  

 

 

   

 

Ordercode: 30774 

Stage Blinder 8 DMX 

 

 

Operating Determinations 

 

This device is not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 

 

The minimum distance between light output and the illuminated surface must be bigger than 2 
meters. 

 

The maximum ambient temperature ta = 40°C must never be exceeded. 

 

The relative humidity must not exceed 50 % with an ambient temperature of 40° C. 

 

If this device is operated in any other way than the one described in this manual, the product may 
suffer damages and the warranty becomes void. 

 

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc. 

 

You endanger your own safety and the safety of others! 

 

Rigging 

Please follow the European and national guidelines concerning rigging, trussing and all 
other safety issues. 

 

Do not attempt the installation yourself! 
Always have the inspections carried out by an authorized dealer! 

 

Procedure: 

 

If the Stage Blinder is lowered from the ceiling or high joists, professional trussing systems have to be 
used. 

 

Use a clamp to mount the Stage Blinder, with the mounting bracket, to the trussing system. 

 

The Stage Blinder must never be fixed swinging freely in the room.  

 

The installation must always be secured with a safety attachment, e.g. an appropriate safety net or 
safety cable. 

 

When rigging, derigging or servicing the Stage Blinder, always make sure, that the area below the 
installation site is secured and that there are not any unauthorized people around. 

 

Improper installation can cause serious injuries and/or damage of property! 

 

Connection with the mains 

Connect the device to the mains with the power-plug. 
Always check if the right color cable is connected to the right place. 
 

International 

EU Cable 

UK Cable 

US Cable 

Pin 

BROWN

 

RED

 

YELLOW/COPPER

 

PHASE

 

BLUE 

BLACK 

SILVER 

NEUTRAL 

 

YELLOW/GREEN 

GREEN 

GREEN 

PROTECTIVE GROUND 

 

Make sure that the device is always properly connected to the earth! 

 

Improper installation can cause serious injuries and/or damage of property! 

 

 

Summary of Contents for Stage Blinder 4 DMX Black





















Reviews: