9
Ordercode: 30774
Stage Blinder 8 DMX
Control Modes
There are 3 modes:
•
Auto mode
•
Manual mode
•
DMX-512
One Stage Blinder (Auto Mode)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Plug the end of the electric mains power cord into a proper electric power supply socket.
04)
When the Stage Blinder is not connected with a DMX cable, it functions as a stand-alone device.
05)
Flip the DIP switch # 10 on both DIP switch panels
(06, 07)
to ON position and DIP switch # 9 to OFF
position, to activate Auto mode on both spots.
Auto Mode
: DIP switch #9 to OFF / DIP switch # 10 to ON.
06)
Flip the DIP switches # 1-8 to set the fade speed:
DIP switch # 1 ON = fastest fade speed
DIP switch # 8 ON = slowest fade speed
One Stage Blinder (Manual Mode)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Plug the end of the electric mains power cord into a proper electric power supply socket.
04)
When the Stage Blinder is not connected with a DMX cable, it functions as a stand-alone device.
05)
Flip the DIP switches # 9-10 on both DIP switch panels
(06, 07)
to ON position, to activate Manual
mode on both spots.
Manual Mode
: DIP switches #9-10 to ON.
06)
Flip the DIP switches # 5-8 to set the dimmer intensity, from dark to brightest:
DIP switch # 5 ON = darkest
DIP switch # 8 ON = brightest
07)
If the DIP switches # 5-8 are all set to OFF position, the lamps will be OFF.
08)
The DIP switches # 1-4 are not functional in Manual Mode.
