32
Spectral M1500 Zoom Q4 MKIII
Product code: 43549
Upload
In this submenu you can export current programs from the master device to the connected slave
devices.
01)
Select UPLD and press the ENTER button to open the menu.
02)
Insert the password: UP, DOWN, UP, DOWN and press the ENTER button to confirm.
03)
The display will show SEND.
04)
Press the ENTER button again, to confirm.
05)
While exporting, the slave devices will light up yellow.
06)
If there are any problems with exporting, the master and the slave devices will light up red.
07)
If the operation was completed successfully, the master and the slave devices will light up green.
Reset
In this submenu you can restore the default factory settings and reset the custom programs.
01)
Select REST and press the ENTER button to open the menu.
02)
Insert the password: UP, DOWN, UP, DOWN and press the ENTER button to confirm.
03)
The custom programs will now be reset.
Dimmer
In this submenu you can adjust the dimmer speed.
Select DIMM and press the ENTER button to open the menu.
02)
Press the UP/DOWN buttons to select the following 2 options:
●
DIM 1, DIM 2, DIM 3, DIM 4 (Default): non-linear dimmers, from fast to slow
●
OFF: linear dimmer
03)
Press the ENTER button to confirm your choice.
DMX Error
In this submenu, you can determine the behaviour of the device in case of a DMX signal error.
01)
Select DERR and press the ENTER button to open the menu.
02)
Press the UP/DOWN buttons to select the following 2 options:
●
SAVE: in case of a DMX signal failure the device will use the last properly received DMX signal
ensuring uninterrupted performance. SAVE is the default setting.
●
BLACK: in case of a DMX signal failure the device will black out the light output.
03)
Press the ENTER button to confirm your choice.
Settings Menu Lock
In this submenu, you can lock the access to the settings.
01)
Select SLCK and press the ENTER button to open the menu.
02)
Press the UP/DOWN buttons to select the following 2 options:
●
ON: The settings lock is on. If you have chosen ON, you will need to insert the password every
time you want to gain access to the settings menu. The default password is pressing the
UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN and press the ENTER button to
confirm.
●
OFF: The access to the settings menu remains unlocked after the display turns off
03)
Press the ENTER button to confirm your choice.
Summary of Contents for Spectral M1500 Zoom Q4 MKII
