SHOWTEC Spectral M1500 Zoom Q4 MKII, User Manual

Page: 31 / 48

30
Spectral M1500 Zoom Q4 MKIII
Product code: 43549
Edit Mode
In this menu you can select a custom program. There are 10 custom programs, which can be edited in
the Edit menu.
Press the UP/DOWN buttons to choose a custom program.
02) Press the ENTER button to confirm your choice.
03) Press the UP/DOWN buttons to choose a scene. Each custom program has 30 scenes, which can be
edited.
04) Once you have chosen the desired scene, press the ENTER button to enter the settings submenu.
05) Press the UP/DOWN buttons to select the parameter.
06) Press the ENTER button to confirm the selection and open the submenu.
07) Press the UP/DOWN buttons to increase/decrease the values:
●
RED: Set the intensity of the red color. The adjustment range is 0–255, from low to
high intensity
● GREEN: Set the intensity of the green color. The adjustment range is 0–255, from low
to high intensity
● BLUE: Set the intensity of the blue color. The adjustment range is 0–255, from low to
high intensity
● WHITE: Set the intensity of the white color. The adjustment range is 0–255, from low
to high intensity
● ZOOM: Adjust the zoom. The adjustment range is 0–255, from low to high intensity
● STROBE: Add strobe effect. The adjustment range is 0–20, from OFF to high
frequency
● STEP TIME Adjust the step time, to set the duration of a scene. The adjustment range is
0–255, from 0 to 255 seconds
● FADE Adjust the fade time between particular scenes. The adjustment range is 0–
255, from 0 to 255 seconds
08) Press the ENTER button to set the value and to move to the next setting.
How to make your own custom program
01) First, start with PR.01 and add the desired settings in scene 1 (SC.01), then scene 2 (SC.02) , etc.
02) In this way you can add a maximum of 30 scenes .
03) After that, you can start with PR.02 and create a maximum of 30 scenes again .
04) You can repeat these steps, until you’ve reached PR.10, step 30 .
05) It is possible to create 300 separate scenes .