13
Pixelbar 16 Q6
Product code: 41308
CAUTION
Restrict the access under the work area during rigging and/or derigging.
To mount the device, follow the steps below:
Install the 2 mounting brackets (03) for option 1, or 1 mounting bracket (03) for option 2.
Fasten the quick-lock brackets on the mounting brackets (03) as shown in Fig. 07.
Note:
It is possible to attach the quick-lock bracket directly to the back of the device without
using a mounting bracket (03) (option 3).
Install the clamp(s), as shown in Fig. 07. Make sure that you use clamps suitable for attaching the
device to a truss.
Fig. 07
Attach the device to the supporting structure. Make sure that the device cannot move freely.
Secure the device with a secondary suspension, for example a safety cable. Make sure that the
secondary suspension can hold 10 times the weight of the device. If possible, the secondary
suspension should be attached to a supporting structure independent of the primary suspension. Put
the safety cable through the safety eye (05), as shown in Fig. 07.
