12
Pixelbar 16 Q6
Product code: 41308
4.
Installation
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
If trussing systems are used, installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning rigging and trussing.
Personal Protective Equipment
During installation and rigging wear personal protective equipment in compliance with the national and
site-specific regulations.
Installation Site Requirements
●
The device can be used only indoors.
●
The device can be mounted to a truss or another rigging structure in any orientation.
●
The minimum distance to other objects must be bigger than 0,8 m.
●
The maximum ambient temperature t
a
= 40 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Rigging
The device can be positioned on a flat surface or mounted to a truss or other rigging structure in any
orientation. Make sure that all loads are within the pre-determined limits of the supporting structure.
The device is delivered with 2 mounting brackets (03) and 2 adjustment screws (02). The mounting
brackets can be positioned in 2 ways or the device can be installed without mounting brackets:
●
Option 1:
2 mounting brackets on both sides (see Fig. 06)
●
Option 2:
1 mounting bracket on the back (see Fig. 06)
●
Option 3:
without mounting brackets (see Fig. 07)
Fig. 06
