6
41014 LED TUBE BASIC
Fig. 3
1)
Signal Input: Low voltage Signal Input must be connected to the Signal Output (
6
) of the previous tube or
with the Signal Output cable from the LED Tube Basic controller.
2)
Ground: Be sure to ground the LED tube properly.
3)
Mains Input Cable: This cable must be connected to the Mains Output (
5
) of the previous tube or
to any mains wall socket
4)
Aluminum Tube Holder: To install the tube on a surface.
5)
Mains Output Cable: This cable must be connected to the Mains Input (
3
) of the next tube. If there are no
further tubes to be connected, you must seal this connector against humidity if the tubes are used
outdoor.
6)
Signal Output
SPYA0058 PSU
1)
DC +12V Output 2
2)
DC +12V Output 2
3)
Ground connection
4)
AC Input
5)
Fuse 15A
6)
ON/OFF
Output 1 Output 2
Fig. 4
Summary of Contents for LED Music Tube Controller
Page 1: ...LED Tube Basic Square ORDERCODE 41014...
Page 15: ...2007 Showtec...
