background image

4

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your Showtec dealer for service.

For replacement use fuses of same type and rating only.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

If this device is operated in any other way, than the one described in this manual, the product may suffer 
damages and the warranty becomes void. 

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other 
safety issues.

Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !

Procedure:

If a LED tube is lowered from the ceiling or high joists, professional trussing systems have to be used.

Mount the LED tube to the trussing system.

The LED tube must never be fixed swinging freely in the room. 

The installation must always be secured with a safety attachment, e.g. an appropriate safety net or 
safety-cable.

When rigging, derigging or servicing the LED tube, always make sure, that the area below the 
installation place is blocked and staying in the area is forbidden.

Improper installation can cause serious damage to people and property !

CAUTION ! EYEDAMAGES !.

Avoid looking directly into the light source.

(meant especially for epileptics) !

Summary of Contents for LED Music Tube Controller
















Reviews: