27
Ordercode: 43740
Helix M1000 Q4 Mobile
4.1. Program 01
01)
If you have chosen program 01, the display will show:
02)
Press the UP/DOWN buttons to choose one of the 2 options:
●
COLOR
●
STROBE
03)
Press the SET button to enter the desired menu.
04)
If you have chosen COLOR, press the UP/DOWN buttons to choose one of the 33 color macros. Press
the SET button to save your settings.
05)
If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The adjustment
range is between 0–99, from OFF to high frequency. Press the SET button to save your settings.
4.2. Programs 02-16
01)
If you have chosen one of the programs 02–16, the display will show:
02)
Press the UP/DOWN buttons to choose one of the 2 options:
●
SPEED
●
STROBE
03)
Press the SET button to enter the desired menu.
04)
If you have chosen SPEED, press the UP/DOWN buttons to set the built-in program’s speed. The
adjustment range is between 1–100, from slow to fast. Press the SET button to save your settings.
05)
If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The adjustment
range is between 0–99, from OFF to high frequency. Press the SET button to save your settings.
5. Master/Slave Mode
With this menu you can set the device as a slave.
01)
While in the main menu, press the UP/DOWN buttons to choose SLAVE.
02)
Press the SET button to enter the menu. The display will show:
03)
Press the UP/DOWN buttons to choose YES or NO.
04)
Press the SET button to confirm your choice.
05)
If you have chosen YES, the device will be set as a slave and will react the same as the master
device.
