8
Multiple Movingheads DMX Set Up
Fig. 3
Note : Link all cables before connecting electric power
Controlling:
After having addressed all the fixtures, you may now start operating these via your lighting controller.
If there is no data received at the DMX-input, the problem may be:
•
The XLR cable from the controller is not connected with the input of the first fixture.
•
The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note:
It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Summary of Contents for DB-1-8
Page 15: ......
