SHOWTEC Data Flash Strobe, Manual

Page: 19 / 28

Ordercode: 40296
Data Flash Strobe
8. Info
01)
Press the MODE button and then the UP/DOWN buttons, until the display shows .
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to choose between the 2 options, and .
04) Press the SETUP button to open one of the 2 options.
05) In the menu , the device will display if the temperature from the device is too high or not.
06) In the menu you can view the current software version.
DMX Channels
2 channels
Channel 1 – Dimmer intensity
0-255 Gradual adjustment, from dark to brightest 0-100%
Channel 2 – Strobe (
Dimmer must be open )
0-4 Closed
5-127 Linear strobe, from low to high frequency (0-20Hz) ALL LEDs
128-189 Random strobe, from low to high frequency ALL LEDs
190-255 Random strobe RANDOM LED RINGS
3 channels
Channel 1 – Dimmer intensity
0-255 Gradual adjustment, from dark to brightest 0-100%
Channel 2 – Strobe (
Dimmer and CH3 must be open )
0-4 Closed
5-255 Strobe flash frequency, from low to high frequency (0-20 Hz)
Channel 3 – Strobe mode (
Dimmer and CH2 must be open )
0-127 Linear strobe, from low to high frequency (0-20Hz) ALL LEDs
128-149 Random strobe, from low to high frequency ALL LEDs
150-172 Random strobe RANDOM LED RINGS
173-199 Blinder mode (25Hz) ALL LEDs
200-231 Sound sensitivity, from OFF to high sensitivity
232-255 Single flash mode
18