SHOWTEC Creator 1024 pro Manual Download Page 36 | Manualshive

Page: 36 / 44

background image

35

Ordercode: 50731

Creator 1024 PRO

4. Save/Load a Show

Save Show List

01)

Press <Setup>.

02)

Press <E> [Show Record] and insert a USB memory stick.

03)

Press <C> [Save Show List].

04)

Turn the Wheel V to modify the characters. Press <Up> and <Down> to move the cursor. Press
<Delete> to delete a character.

05)

After naming the file, press <Enter> to save.

Load Show List

01)

Press <Setup>.

02)

Press <E> [Show Record] and insert a USB memory stick.

03)

Press <D> [Load Show List].

04)

Select the desired show list and press <Enter> to start loading.

Save a Single Show

01)

Press <Setup>.

02)

Press <E> [Show Record] and insert a USB memory stick.

03)

Press <A> [Show List] and select the show.

04)

Press <D> [Save&Load Show] and press <A> [Save Show].

05)

Turn the Wheel V to modify the characters. Press <Up> and <Down> to move the cursor. Press
<Delete> to delete a character.

06)

After naming the file, press <Enter> to save.

Load a Single Show

01)

Press <Setup>.

02)

Press <E> [Show Record] and insert a USB memory stick.

03)

Press <A> [Show List] and select the show.

04)

Press <D> [Save&Load Show] and press <B> [Load Show].

05)

Press <Enter> to load.

Setup

Press <Setup> to enter the following options:

1. Save & Load

To save data to and load data from a USB memory stick.



Save data: Enter Save Data menu, turn the Wheel V to set the characters. Press <Up> and <Down>
to move the cursor. Press <Delete> to delete a character. After naming, insert a USB memory stick
and press <Enter> to save the data.



Load data: Insert a correct USB memory stick. Select the desired data from the list that appears on
the screen. Press <Up> and <Down> to browse. Press <A-E> to select the desired option.

2. Wipe Data



Wipe Playback: Only the data in the playback area will be wiped off. Other data will remain.



Wipe Palette: Only the data in the palette area will be wiped off. Other data will remain.



Wipe All: Data of playback, palette and patch will all be wiped off. But, the library data will remain.

3. Select Language

There are two language versions available on the Creator: Chinese and English.

«
...
34
35
36
37
38
...
»

Summary of Contents for Creator 1024 pro













































Reviews:

No comments

Related manuals for Creator 1024 pro

Brand: Modulate Pages: 2

Brand: Baker Pages: 82

Brand: Rain-Flo Irrigation Pages: 16

Brand: KaVo Pages: 49

Brand: Easson Pages: 33

Brand: Garelick Pages: 2

Brand: Garelick Pages: 2

Brand: Gardigo Pages: 32

Brand: Patiova Pages: 19

Brand: Taurus Pages: 24

Brand: jablotron Pages: 2

Brand: jablotron Pages: 2

Brand: LA Audio Pages: 9

Brand: Nabtesco Pages: 26

Brand: uniprox Pages: 3

Littmann Classic II Pediatric

Brand: 3M Pages: 53

Brand: ICS Pages: 156

Brand: Pfeuffer Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands