SHOWTEC 50700, Product Manual

Page: 8 / 19

6
1) Scanner select buttons
To select scanners for setting, programming or recording.
2) Scanner indicator
LED's Indicates the fixtures currently selected
3) Strobe LED
Used for Showtec strobes.
4) Page A Indicator
LED represents Ch 1~8 range selected
5) Page B Indicator
LED represents Ch 9~16 range selected
6) Scene select buttons
Universal bump buttons representing scene location for storage and selection
7) Channel faders
For adjusting DMX values, Ch 1~8 can be adjusted immediately, after pressing the respective scanner
select button, Ch 9~16 after pressing the Page select button
8) LCD display window
Status window displays pertinent operational data
9) Mode Indicator
LED’S Provides operating mode status, (manual, music or auto)
10) Midi/Add button
Activates MIDI external control and also used to confirm the record/save process
11) Program button
Activates program mode.
12) Bank Up / Down button
Press the Up/Down button to select from 30 banks.
13) Chase buttons
Chase memory 1 ~ 6; These buttons are used for activating the chase of programmed scenes.
14) Blackout button
Press this button to enable or disable relevant DMX output. When its LED is lit, that means the relevant
DMX output is disabled. Press this button again the LED will be “off”, that means the DMX output is
reactivated.
15) Fog Heat Ready LED
This button is used to control the Fog machine. Relevant LED will show you the working state (READY).
16) Reverse Channel LED
Indicates reverse channel programming mode
17) Fade LED
Indicates fade programming mode
18) Page select button
Used to select page between Page A (I-8) and Page B (9-16).
19) Speed fader
This will adjust the hold time of a scene or a step within a chase (range of 0.1 second to 10 minutes).
20) Fade Time fader
Used to adjust the fade time. Fade time is the amount of time it takes for a scanner (or scanners) to
Move from one position to another, for the dimmer to fade in or fade out.
21) Auto/Del button
Activates Music mode or to delete scenes or chases during programming
22) Music/Bank Copy button
Activates Music mode or as the copy command during programming
23) Tapsync/Display button
Used to create a standard beat or to change the value mode between % and 0-255.