12
Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory.
See “Delete All Chases”
for instructions.
CREATE A CHASE
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
1)
Press and hold the
PROGRAM
button for 3 seconds.
2)
Press the
CHASE
(1~6) button you wish to program.
3)
Change
BANK
if necessary to locate a scene.
4)
Select the
SCENE
to insert.
5)
Tap the
MIDI/ADD
button to store. All LED’s will flash 3 times.
6)
Repeat steps 3 ~ 5 to add additional steps in the chase. Up to 240 steps can be recorded.
7)
Press and hold the
PROGRAM
button for 3 seconds to save the chase.
COPY BANK INTO CHASE
1)
Press and hold the
PROGRAM
button for 3 seconds to enter programming mode.
2)
Select the
BANK
to be copied using the
BANK UP/DOWN
buttons.
3)
Press
MUSIC/BANK COPY
and
Midi/Add
buttons at the same time to copy.
4)
Press and hold the
PROGRAM
button for 3 seconds to exit programming mode.
ADDING A STEP TO A CHASE
1)
Press and hold the
PROGRAM
button for 3 seconds to enter programming mode.
2)
Press the desired
CHASE
(1~6) button.
3)
Press the
TAPSYNC/Display
and the display will display the scene and bank number. This displays the
scene you will be adding (
STEP
LED must be on),
4)
Use the
BANK UP/DOWN
buttons to scroll through the chase and arrive at the step number for which
you would like to add or append a scene/step to.
5)
Press
MIDI/ADD
button and one step number will be added to the previously displayed step number.
6)
Press the
SCENE
button that corresponds to the scene to be copied.
7)
Press
MIDI/ADD
button again to add the new step.
8)
Press and hold the
PROGRAM
button for 3 seconds to exit programming mode.
DELETE A SCENE/STEP IN A CHASE
1)
Press and hold the
PROGRAM
button for 3 seconds to enter programming mode.
2)
Press the desired
CHASE
(1~6) button that contains the scene to be deleted.
3)
Press the
TAPSYNC/DISPLAY
button to switch the LED display to steps.
4)
Select the scene/step to be deleted using the
BANK UP/DOWN
buttons.
5)
Press
AUTO/DEL
button to delete the step/scene.
6)
Press and hold
PROGRAM
button for 3 seconds to exit.
DELETE A CHASE
1)
Press and hold the
PROGRAM
button for 3 seconds to enter programming mode.
2)
Press the
CHASE
button (1~6) to be deleted.
3)
Press and hold the
AUTO DEL
button and the respective
CHASE
button then release to delete the
chase. All LED’s will blink 3 times.
DELETE ALL CHASE PROGRAMS
CAUTION!
This procedure will result in irrevocable loss of chase step memory. The individual
scenes and program banks will be preserved.
1)
Press and hold the
BANK DOWN
button and the
AUTO DEL
button while turning OFF the controller.
Summary of Contents for 50700
Page 1: ...SM 8 2 ORDERCODE 50700...
Page 19: ......
