9
Number
Buttons or sliders
Function
1
Scanner select buttons
Select DMX devices
2
Scanner indicator LEDs
Indicate if the DMX device is activated
3
Scene select buttons
Buttons for recalling or saving the scenes
4
Channel slider
After activating the Scanner select buttons, the sliders
1 ~ 16 can set the DMX values.
5
Program button
To activate the programming mode
6
Music/Bank Copy button
Used to activate the music mode and as a copy
command during programming
7
LED display
The display shows current settings
8
Mode indicator LEDs
Display the current mode. (Manual, Music or Auto
mode)
9
Bank Up Button
Function key for switching through scenes / steps in
banks or chases
10
Bank Down Button
Function key for switching through scenes / steps in
banks or chases
11
Tap Display Button
Sets the chases speed by tapping and toggles the
display between DMX values (0-255) and DMX percent
(0-100).
12
Blackout button
Sets the shutter or dimmer value of all lights to "0",
which causes all DMX devices to go to the "OFF" state.
13
ADD button
is used to confirm the recording / saving process
14
Auto/Del button
Used to activate the Auto mode and as a delete
function button during programming
15
Chase Buttons
Chase memory locations from 1 ~ 6
16
Speed slider
Scan mode: Adjusts the speed between scenes within
a chase
In Color Mode you can use the slider as a master
dimmer for the brightness of all RGB spotlights.
17
Fade Time slider
Scan Mode: Also considered a crossfade, this sets the
interval time between two scenes in a chase. If you
activate Strobe in Color Mode, you can change the
speed of the flash with the fader
18
color mode
You can switch between Scanner Mode (Scanner 1 -
12) and Color Mode