19
3. Programming
A scene bank is a sequence of different scenes (or steps) that are called up one
after the other. 30 scene banks with 8 scenes each can be created. The controller
can store a total of 240 scenes.
3.1 Calling up the programming mode
1) Press the PRGRAM button until the LED flashes.
3.1.1 Programming a scene
A scene is a static lighting condition. Scenes are stored in banks.
1) Press the PROGRAM button until the LED flashes.
2) Press the MODE button to enter either Scanner Mode or Color Mode.
3) Create an illumination by adjusting the sliders of the respective scanner
4) Select another BANK (01~30) if necessary
5) Press and hold the ADD button while pressing the desired SCENES button to
save the scene.
6) Repeat steps 3 to 5 if necessary Up to 8 scenes can be stored in one scene
bank.
7) To exit the programming mode, press and hold the PROGRAM button.
Comments:
When you save a new scene, all LEDs flash to confirm. The LED display now shows
the scene number and bank number used.
When you exit the program mode, deactivate the blackout function if necessary, if
this LED is lit, in order to be able to view the scenes.