22
3.1.7 Deleting all scenes
1) Press and hold the PROGRAM button and the BANK DOWN button while turning
on the controller.
Attention!
This process is irreversible. All scenes with data are set to 0
3.2 Programming Chase
A chase is created using previously created scenes. Scenes become steps / scene
steps in a chase and can be arranged in any order. It is strongly recommended to
delete all chases from memory before programming chases for the first time. For
instructions, see "Delete all chases".
3.2.1 Programming a Chase
A chase can contain 240 scenes as steps. The term steps describes scenes which
are arranged one after another within a chase.
1) Press and hold the PROGRAM button until the LED flashes.
2) Press the desired CHASE (1~6) button
3) If necessary, change the BANK to select the correct scene.
4) Select the desired SCENE to insert.
5) Press the ADD button to insert.
6) Repeat steps 3 to 5 to add more steps to the chase. Up to 240 steps can be
recorded.
7) Press and hold the PROGRAM button to save the chase
3.2.2 Calling a Chase
1) Press the desired CHASE button and then press the AUTO DEL button.
2) Set the desired speed by briefly pressing the TAP/DISPLAY button twice.
Note:
The time between the first and second tap sets the chase speed (up to 10 minutes).