Showco Laser RGB, Manual

Page: 7 / 17

8. Adjustable mirror socket
(1) Steps
1. Loose setscrew of X,Y and then adjust mirror socket to suitable position by X,Y
adjustable screws.
2. Adjust Z adjustable screw at same time.
3. Fix X,Y setscrew.
NOTE: Make sure all beams through adjustable mirror socket be one point when you
adjust X,Y ,Z line with adjustable screw.
(2) RGB Laser beams mix system:
Mirror socket 1:Transmit red beam,reflect green beam,and then mix out yellow
beam through
mirror socket 1.
Mirror socket 2:Transmit yellow beam,reflect blue beam ,and then mix out white
beam through
mirror socket 2.
Y setscrew
Y adjustable screw
X adjustable screw
Z adjustable screw
X setscrew
setscrew
Fig8-1 Adjustable mirror socket structure
Blue beam
Red beam
Green beam
Yellow beam White beam
Mirror 2 Mirror 1
Fig8-2 RGB laser beams mix system
6
www.carlosmendoza.com.mx