Showco Laser RGB, Manual

Page: 9 / 17

8
1
2
3
4
5
6
7
POWER ON/OFF:
Power on/off
DMX IN/OUT:
International standard DMX512 signal input/output
MIN MAX:
Sound control
MIC: Sound receiver
ILDA DB25F IN/OUT: Signal input connection port of the laser perform software that
in accordance with the ILDA standard.
POWER INPUT Input power, with inner fuse.
Security key switch
Laser diode ON/OFF
Remote Lock In the event of remov al, laser will not emit a ny beam.(E.U. IEC regulation)
10. Control board instruction
8
DMX
Signal
Work
Status
Security
key switch
IN DMX OUT
ILDADB-25F Connector-OUT
ILDADB-25M Connector-IN
POWER IN
OFF
ON
MIC
Remote Lock
MIN MAX
OFF ON
1
2
3
4 5 7
8 6
MODE ENTER UP DOWN
DMX
Signal
Work
Status
MODE ENTER UP DOWN
MODE: Select working mode or back to upper menu.
ENTER: Confirm setting or go to subordinate menu.
UP: Increase DMX address value.
DOWN: Decrease DMX address value.
DMXSignal: DMX512 input situation.. LED on means have input DMX512
otherwise no input DMX512 or input signal abnormality.
Work Status: LED on means display PCB work well otherwise it is not work in good
Condition.
1. Control board operation way:
www.carlosmendoza.com.mx