Showco Laser RGB, Manual

Page: 2 / 17

1
1. Open the box for checking
In order to use this product safety and reasonable for the users, please read over
this manual carefully before use and the operation must strictly according to this
manual to avoid any damage to the product and personal safety.
Once after received this products please take and put carefully . And check
carefully that whether the product was damaged or not during the transportation and
please check the following things were enclosed:
Laser light 1PC 1PC
3 pin signal line 1PC User manual 1PC
Power cable 1PC
2. Installation
1. Please check the voltage whether is the same with the one showed on the
equipment or not.
2. It must ask for the technical person and set the light safety when installation. And
let the light beam at the suitable angle.
3. When install this equipment please make sure there's no flammable surfaces
(decorated things, etc) within at least 1.5M and maintain minimum distance of
0.5M from the equipment to the walls.
4. Please make sure that there's no other equipment or decorating materials
obstructed the exhaust fan and the vent-pipe.
5. Products should be install immobility.
6. In case of safety, it's very important that to connect the earth with line.
Pin 25 ILDA Signal cable
www.carlosmendoza.com.mx