5
Tuning Method
Spring Preload Tuning and Damping Force
Perform spring preload tuning and damping force tuning of the BFRC
®
lite Kit following the procedure below.
CAUTION
Always perform tuning in the position that a clicking feeling can be felt. When
tuned between clicking positions, it can cause shifted setting during riding.
● Spring Preload Tuning
Turn the tuning dial on the spring adjuster
COMP with your hand to adjust.
CAUTION
Do not force to turn from the
position that stops lightly for
the Low side and High side.
It may cause internal damage.
[Note]
Spring set length L = 149 mm is the standard
position.
High: L < 149 mm
Low: L > 149 mm
● Damping Force Tuning
Adjust the COM and REB on the plug bolt
COMP by turning with a hexagonal wrench (3
mm).
COM: Compression side
REB: Rebound side
CAUTION
Do not force to turn from the
position that stops lightly for
the Soft side and Hard side.
It may cause internal damage.
[Note]
The standard on the compression side is
22 clicks counterclockwise from the position
that is turned all the way on the Hard side.
The standard on the rebound side is 12
clicks counterclockwise from the position
that is turned all the way on the Hard side.
High
Low
L=149mm
Hard
Soft
Soft
Hard
Balance Free Rear Cushion lite (BFRC lite)_オーナーズマニュアル_e.indd 5
2016/06/13 19:44:31
