9
Replacement Method of the Spring
Installation
1. Attach the spring
and spring seat stop-
per
to the cushion sub COMP
.
2. Attach to a spring compressor, and push
down the spring seat stopper
until the
groove
is visible.
3. Attach the stopper ring
in the groove
.
4. Check the spring seat stopper
is hooked
on the stopper ring
, and remove the
BFRC
®
lite Kit from the spring compressor.
WARNING
Attach the stopper ring
to the whole circumfer-
ence around the groove
firmly.
5. Install the BFRC
®
lite Kit to the motorcycle.
For installation, refer to Installation Method
of the Product (Replacement from Stan-
dard Specification) (Page 3).
Balance Free Rear Cushion lite (BFRC lite)_オーナーズマニュアル_e.indd 9
2016/06/13 19:44:33
