3
Installation Method of the Product (Replacement from Standard Specification)
WARNING
Please make sure that installation is conducted in a dealership or controlled
environment where there are technicians with special knowledge and skills.
When replacing the rear cushion, conduct tuning of the motorcycle posture with the following ways.
Measuring Vehicle Height Before Replacing
1. While placing a motorcycle on the ground, measure the distance from the axle shaft of the rear
wheel to the top frame, and record the value.
2. Measure above while a rider is on the motorcycle, and record the value.
3. Measure above by jacking up the motorcycle and the rear wheel is dropped completely, and record
the value.
Installation
1. Remove the standard rear cushion on the motorcycle.
[Note]
For the removing method of the rear cushion, refer to the service manual of the motorcycle manu-
facturer.
2. Install the BFRC
®
lite Kit to the motorcycle.
[Note]
Install the lower metal to face the forward direction of the motorcycle.
For the tightening torque of each bolt, refer to the service manual of the motorcycle manufacturer.
3. Install the stay
on the spring adjuster
COMP
.
Install with M6 x 1.0 bolt
.
Tightening torque: 5.9 to 8.8 N·m
5.9-8.8 N
.
m
Balance Free Rear Cushion lite (BFRC lite)_オーナーズマニュアル_e.indd 3
2016/06/13 19:44:30
