11
Vehicle height adjusting with the lower metal
Turn the lower metal
clockwise to
push the line
into the lower joint side
for 1 mm, and the length is shortened
by 1 mm.
1mm
Turn the lower metal
counterclock-
wise to extract the line
outward for
3 mm, and the length is extended by 3
mm.
Turn the lower metal
half to change
the whole length by 0.5 mm.
CAUTION
The lower metal
is de-
signed not to be removed.
Do not force to turn or the
part breaks. When turning
the lower metal
, use
your hand instead of a
wrench.
3mm
3. Fix the lower joint
, and tighten the lock
nut
to the specified torque.
Tightening torque: 20 to 30 N·m
4. Install the BFRC
®
lite Kit to the motorcycle.
For installation, refer to Installation Method
of the Product (Replacement from Stan-
dard Specification) (Page 3).
20-30 N
.
m
Balance Free Rear Cushion lite (BFRC lite)_オーナーズマニュアル_e.indd 11
2016/06/13 19:44:33
