SHOP-VAC
®
ONE YEAR
INDUSTRIAL/COMMERCIAL WARRANTY
Shop-Vac
®
Corporation warrants the vacuum cleaner contained in this package for one year from
the date of purchase to correct by repair or parts replacement without charge any product defect
due to faulty material or workmanship. Should this product be used for rental service, a 90 day
limited warranty will apply. ThIS WARRANTY DOES NOT COVER ACCESSORIES. Shop-Vac
®
assumes no responsibility for damage or faulty performance caused by misuse or careless
handling, or where repairs or modifications have been made or attempted by others. Proof of pur-
chase date is required. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
Customers in the United States: for product service contact Shop-Vac
®
Corporation Customer
Service, at (570) 326-3557 or e-mail [email protected]. Visit www.shopvac.com for your
vacuum's parts list schematic.
Customers in Canada: for product service return the complete unit, (transportation prepaid), to
the Authorized Shop-Vac
®
Service Center nearest you. Visit www.shopvac.ca for a complete list
of Authorized Service Centers in your area.
Customers in Mexico: For product service see paperwork that came with your unit.
Limited One-Year Warranty
WARNING
– IF ANY OF THE MOTOR HOUSING PARTS
SHOULD BECOME DETACHED OR BROkEN, EXPOSING THE MOTOR
OR ANY OTHER ELECTRICAL COMPONENTS, OPERATION SHOULD
BE DISCONTINUED IMMEDIATELY TO AVOID PERSONAL INJURY OR
FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE
BEFORE REUSING THE VACUUM.
Trouble Possible Cause
Remedy
Suction weakens or
cleaner runs hot
Clogged filter
Brush dirt from filter. If condition continues,
change filter.
Air leak
Check all fittings for tight fit (nozzles, hose, etc.)
Check that tank cover is sealed properly.
Obstruction in hose
or nozzle
Check nozzle, hose, etc. for obstructions, and
remove if present.
Misting in the
exhaust air
Saturated filter
Replace saturated filter with a dry filter.
Mounting ring
falling off
Foam sleeve
incorrectly positioned
Position foam sleeve on the outside of groove
around lid cage.
TROUBLESHOOTING
