-23-
Model W1845 (For Machines Mfd. Since 6/17)
O
PE
R
ATIO
NS
OPERATIONS
General
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed
incorrectly.
The instructions in this section are written with the
understanding that the operator has the necessary
knowledge and skills to operate this machine. If at any
time you are experiencing difficulties performing any
operation, stop using the machine!
The overview below provides the novice machine operator
with a basic understanding of how the machine is used
during operation, so the machine controls/components
discussed later in this manual are easier to understand.
Due to its generic nature, this overview is
NOT
intended
to be an instructional guide.
To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
To. reduce. the. risk. of. eye. injury. and.
long-term. respiratory. damage,. always.
wear. safety. glasses. and. a. respirator.
while.operating.this.machine.
To.complete.a.typical.operation,.the.operator.does.the.
following:
1.
Examines workpiece to make sure it is suitable for
sanding. No extreme bows, knots, or cracks should
exist.
2.
Prepares and trims workpiece as necessary.
3.
Adjusts table horizontally to allow maximum
1
⁄
16
"
clearance between table and sandpaper.
4.
Inspects sandpaper for damage and replaces if
necessary.
5. Chooses sandpaper grit appropriate for operation
and correctly installs sandpaper.
6.
Ties back loose hair and clothing, and puts on face
shield and respirator. Takes all other required safety
precautions.
7. Starts sander.
8. While holding workpiece with both hands, gradually
eases workpiece into sanding belt or spindle.
If you are an inexperienced operator,
we strongly recommend that you read
books or trade articles, or seek training
from an experienced operator of this
type of machinery before performing
unfamiliar operations.
Above.all,.safety.
must.come.first!
Summary of Contents for W1845
Page 45: ...Model W1845 For Machines Mfd Since 6 17...
Page 48: ......
