Introduction
Your new Model W1750 Bandsaw Stand (
Figure 1
) is
designed for use with the Model W1749 9" Bandsaw.
Inventory
(Figure 2)
Qty
A.
Long Top Brackets .........................................2
B.
Short Top Brackets ........................................2
C.
Long Bottom Brackets ....................................2
D.
Short Bottom Brackets ....................................2
E.
Stand legs ...................................................4
Hardware Bag (Not Shown)
• Carriage Bolts
5
⁄
16
"-18 x
1
⁄
2
" ........................... 16
• Hex Bolts
5
⁄
16
"-18 x 1
3
⁄
4
" .................................4
• Hex Nuts
5
⁄
16
"-18 ........................................ 20
• Flat Washers
5
⁄
16
" ........................................ 24
Specifications
• Overall Size ............... 21
1
⁄
2
" W x 27
3
⁄
4
" L x 27
1
⁄
4
" H
• Weight .................................................12 lbs
Assembly
We recommend assembling the stand upside down. To
make it easier, have an assistant hold the pieces while
you assemble the stand.
Model W1750
Bandsaw Stand
Instruction Sheet
NOTICE
Do not final tighten stand bolts until all components
have been assembled.
Figure 1.
Model W1750.
Figure 2
. Model W1750 Inventory.
Figure 3
. Top and bottom long brackets
secured to a stand leg.
To assemble the stand, do these steps:
1.
Mount a long top and bottom bracket to a stand leg
and loosely secure with two
5
⁄
16
"-18 x
1
⁄
2
" carriage
bolts, flat washers, and hex nuts as shown in
Figure 3
.
A
B
D
E
C
Leg
Long
Bottom
Bracket
Long Top
Bracket
Summary of Contents for W1750
Page 4: ......
