MightyMount
Quick Start Installation Guide
What’s Included
A) 1/4” Hex Key
B) (4) Display Thumb Screws (M4 x 8)
C) (4) Display Thumb Screws (M4 x 12)
D) Track cover
2. Install Onto Track
Tools You’ll Need
• #1 Phillips screwdriver
• Wire Cutter & Tie Wraps (for securing
keyboard and mouse cabling: see Step 4 for
instructions on accessing prewired USB hub)
3. Level and Tighten
Use 1/4” Hex Key to Tighten Four Slider Key Bolts
1. Install Mounting Track*
* Refer to track installation instructions
4. USB Hub Access
1) Turn latch on rear of keyboard enclosure to
release cover. Pull cover forward to access the
USB hub.
5. Install Display
Using (4) M4 x 8 Display Thumb Screws, attach
display to MightyMount.
(
NOTE:
If the M4 x 8 Display
Thumb Screws can’t be threaded sufficiently to provide a secure
attachment, use the M4 x 12 Display Thumb Screws instead.)
6. Run Cables and Install
Cable Guard
Display cables can be secured to the neck with a
tie wrap fed through the provided holes
7. Install Track Cable Cover
Cut supplied track cover to desired length(s) and
slide into track channels as shown
Visit strongarmhealthcare.com to view our installation video.
STRONGARM
healthcare
