1
947738
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 2
VIP-581
IP FlexHorn Angled Surface Mount
INTRODUCTION
The VIP-581 IP FlexHorn Angled Surface Mount
unit enables loudspeaker voice paging anywhere
on an Ethernet network. The VIP-581 consists of
a high efficiency Class-D Horn and a Network
interface, allowing stand alone capability when
used with a SIP telephone system or can be
accessed from a variety of Valcom managed
VoIP products. Power is provided to the VIP-581
via a Power over Ethernet (PoE) switch meeting
the 802.3af specification.
SPECIFICATIONS
Access Methods
SIP telephone system
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
Features
RJ-45 for network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af
compatible
Paintable grille and enclosure
Dimensions/Weight
10.0” H x 12.2" W x 5.0" D
1
x 3.62” D
2
(25.4cm H x 30.9cm W x 12.7cm D
1
x 9.2cm D
2
)
Weight: 7.5 lbs. (3.4 kg)
Nominal Specifications
Input Impedance:
600 Ohms
Input Level:
-10dBm
Output Impedance:
600 Ohms
Output Level:
-10dBm nominal
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Class 3
Environment
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
Packing List
Precautionary Designations
Qty
Item
1
VIP-581 IP FlexHorn
1 VSP
Document
