-33-
Model W1701W (For Machines Mfd. Since 1/16)
O
PE
R
ATIO
NS
W1159—Spacer
1
⁄
2
" Bore, 1" OD,
1
⁄
4
" High
W1160—Spacer
1
⁄
2
" Bore, 1" OD,
3
⁄
8
" High
W1161—Spacer
1
⁄
2
" Bore, 1" OD,
1
⁄
2
" High
W1162—Spacer
1
⁄
2
" Bore, 1" OD,
3
⁄
4
" High
W1163—Spacer
1
⁄
2
" Bore, 1" OD, 1" High
Spacers allow you to position your shaper cutter anywhere on the
spindle. Use them between cutters or stack them above the cutter
to bear against the spindle nut. Every shaper owner needs a set of
these on-hand.
DC1822—20.Pc..Master.Set,.
1
⁄
4
".Shank
This is an excellent combination of micro grain carbide-tipped router
bits. This set includes twenty of the most popular bits offered by
Roman Carbide, all housed in a handsome wooden box. This is an
unbelievable buy.
W1500—Right.Angle.Jig
The SHOP FOX® Right Angle Jig is constructed using top quality
aluminum castings and plates which are machined to exacting toler-
ances. It has the perfect weight-use ratio to dampen vibration, yet is
still light enough to easily slide the workpiece through the machining
process. Its quality and precision are evident from the first cut. Cut
tenons, dados, rail ends, and finger joints safely and with complete
accuracy.
W1114—
3
⁄
4
" Rub Collar, 1
5
⁄
8
" Outside Dia.
W1116—
3
⁄
4
" Rub Collar, 1
3
⁄
4
" Outside Dia.
W1118—
3
⁄
4
" Rub Collar, 1
7
⁄
8
" Outside Dia.
W1119—
3
⁄
4
" Rub Collar, 2" Outside Dia.
W1120—
3
⁄
4
" Rub Collar, 2
1
⁄
8
" Outside Dia.
W1122—
3
⁄
4
" Rub Collar, 2
5
⁄
8
" Outside Dia.
If you do any kind of irregular shaping, rub collars are a must! Rub col-
lars are used for shaping curved work such as cathedral doors, as well
as many custom shapes. They are also used for limiting depth-of-cut,
like guide bearings on router bits.
D3726
—30 Pc. Carbide-Tipped Router Bit Set,
1
⁄
4
" Shank
These are super sharp, micro-grain carbide tipped bits that are
ground up to 800-grit to glide through your cuts. Includes protective
wooden case with see-thru, touch latch doors for easy access.
