Shofu Ceramosonic S, Directions For Use Manual, Page: 27 / 32

9
Condensing Body and Enamel porcelain
1. After building up Body and Enamel porcelain, take the
frame out of the model using tweezers. After addi-
tional application to the contact points, hold the
tweezers handle leaning against the vibrating platform
to condense. Exercise extra caution for not ruining the
shape since the porcelain contains ample water
before condensation. Observe the water gradually
coming out from cervical area to the surface and
remove with a tissue paper.
2. Repeat this procedure for a few times to add the
material to the area where the material is decreased
due to condensation and then condense again. Fire
the porcelain following the conventional method.
Operational tip
(1) When porcelain dries during the operation, add
some water and then condense.
(2) In case of additional porcelain build-up, condense
a little to remove some water.
(3) Condense firmlier when making all ceramics
crowns than making metal ceramics crown.