Shofu Ceramosonic S, Directions For Use Manual, Page: 23 / 32

5
3.2 Connection
1. Make sure the power switch is OFF (on the back
side of the main unit).
2. Connect the power plug to the power cord inlet (on
the back side of the main unit).
3. Put the electric plug into the outlet.
Notes
• This product can be used throughout the world since it
can be used between 100V and 240V. However, the
voltage range to be used differs depending on the
power cord supplied.
AC 125V type cord : 100-120V areas
AC 250V type cord : 220-240V areas
If necessary, use plug adapter to fit the electric outlet
(this is not supplied).
3. Directions for use
3.1 Installation
Notes
• Do not hold the vibrating platform to carry the unit. This
may result in deformation or removal of the platform.
• Place the equipment on a flat and stable table.
• Do not put hot items on the main unit.
• When in use near by a radio, interference may occur.
• Do not use near animals. Some react to the ultrasonic
wave.
• Avoid high humidity, temperature and direct sunlight.
These conditions may suddenly start vibration in the
AUTO mode.
• Use in a normal lab atmosphere.