WR54-01
54M Wireless Router User Guide
- 38 -
have another DHCP server within your network or else you must manually configure the
computer.
¾
Start IP Address -
This field specifies the first of the addresses in the IP address pool.
192.168.1.2 is the default start address.
¾
End IP Address -
This field specifies the last of the addresses in the IP address pool.
192.168.1.254 is the default end address.
¾
Address Lease Time -
The
Address Lease Time
is the amount of time in which a network
user will be allowed connection to the router with their current dynamic IP Address. Enter the
amount of time, in minutes. The user will be "leased" this dynamic IP Address. The range of
the time is 1 ~ 2880 minutes. The default value is 120 minutes.
¾
Default Gateway -
(Optional.) Suggest to input the IP address of the LAN port of the router,
default value is 192.168.1.1
¾
Default Domain -
(Optional.) Input the domain name of your network.
¾
Primary DNS -
(Optional.) Input the DNS IP address provided by your ISP. Or consult your
ISP.
¾
Secondary DNS -
(Optional.) Input the IP address of another DNS server if your ISP
provides two DNS servers.
)
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode. This function will take effect until the router reboots.
5.6.2 DHCP Clients List
This page shows
Client Name, MAC Address, Assigned IP,
and
Lease Time
for each DHCP
Client attached to the router (Figure 5-23):
Figure 5-23 DHCP Clients List
¾
ID -
The index of the DHCP Client
¾
Client Name
-
The name of the DHCP client
¾
MAC Address
-
The MAC address of the DHCP client
¾
Assigned IP
-
The IP address that the router has allocated to the DHCP client.
