Shiro WR54-01, User Manual

Page: 39 / 83

WR54-01 54M Wireless Router User Guide
- 35 -
5.
Status
- Select
Enabled
or
Disabled
for this entry on the
Status
pull-down list.
6. Click the
Save
button to save this entry.
To add additional entries, repeat steps 1-6.
)
Note:
When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled.
To modify or delete an existing entry:
1. Click the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disabled All
button to make all entries disabled.
Click the
Delete All
button to delete all entries
Click the
Next
button to go to the next page and click the
Previous
button to return to the
previous page.
For example:
If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be
able to access the router. The wireless station B with MAC address 00-0A-EB- 00-07-5F not be able
to access the router, and the wireless station C with MAC address 00-0A-EB-00-07-8A be able to
access the router when its WEP key is 2F34D20BE2E 54B326C5476586A, while all other wireless
stations cannot access the router, you should configure the
Wireless MAC Address Filtering
list
by following these steps:
1. Click the
Enable
button to enable this function.
2. Select the radio button:
Deny the stations not specified by any enabled entries in the list
to access
for
Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-BE in the
MAC
Address
field, enter wireless station A in the
Description
field, select
Allow
in the
Privilege
pull-down list and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
5. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-5F in the
MAC
Address
field, enter wireless station B in the
Description
field, select
Deny
in the
Privilege
pull-down list and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return